Jeffrey Publish time 2019-3-12 15:49:57

IDSO 1070A signal distortion

Dear Hantek service,

I got a good tool(Oscilloscope) for cabling to wireless at begin.
But I have problem to test on my devices (Not each device has the symptom)
When I span signal the wave seems good, but if view overall signal then wave seems distortion.
Here is what I experiment as below
https://screenshot.net/tw/dlkr7to
I checked two devices have similar period (1/4.8MHz).
According to Nyquist theorem if the signal without distortion the lowest sample rate must double real signal frequency.
Is it the software display problem?
Can I do anything improve it?
BTY, do we have higher sampling rate wireless oscilloscope?(One of my suspect is low sample rate)

Best wishes,
Jeffrey


Jeffrey Publish time 2019-3-12 17:11:41

Photo link as below
https://screenshot.net/tw/dlkr7to

amy Publish time 2019-3-28 11:48:22

Jeffrey replied at 2019-3-12 17:11
Photo link as below
https://screenshot.net/tw/dlkr7to

Sorry, I can't see what time base you set.
What is the current sampling rate displayed on the software?
Pages: [1]
View full version: IDSO 1070A signal distortion