dmitrius replied at 2018-12-1 02:29
Hi. From the official page http://hantek.com/ProductDetail_5_9242.html. Not working download links:
...
dpcdietmar replied at 2018-12-16 22:41
Ich würde gerne mein Hantek 2c42 auf den neusten Stand bringen.
Was muss ich machen.
was ist der Fp ...
dpcdietmar replied at 2018-12-19 21:21
Hallo FPGA Version 0x0
dpcdietmar replied at 2018-12-22 00:41
Hallo, danke für die Antwort.
Ich habe alles so gemach wie in der Beschreibung.
auch nach aus und e ...
amy replied at 2018-12-26 09:44
Sir, please refer to this post to update the firmware: https://www.eediscuss.com/forum.php?mod=vie ...
amy replied at 2018-12-26 09:44
Sir, please refer to this post to update the firmware: https://www.eediscuss.com/forum.php?mod=vie ...
g00d replied at 2019-1-29 22:35
Здравствуйте. Скажите пожалуйста, почему после обновл ...
AxGxP replied at 2019-1-30 21:48
К сожалению кроме этих проблем есть еще множество, св ...
g00d replied at 2019-1-31 05:59
На счет F3, согласен, после написания сообщения случай ...
DIYShopTools replied at 2019-2-8 02:19
Hello, I just received my 2D72 scope and have been updating/setting up software/firmware/LPGA and af ...
AxGxP replied at 2019-2-8 18:05
Your update is correct. This error in the firmware.
edwardone replied at 2019-2-16 19:59
Спасибо!.., жаль, что у меня все именно плохо... Что там за ...
Alan_C replied at 2019-2-26 02:21
Hi
I have a new problem after upgrading the firmware I lost the AWG function meter is being detecte ...
dreamich replied at 2019-2-26 11:17
Последняя прошивка HantekHTX2019010401 с ошибкой. AWG не работает ...
Alan_C replied at 2019-2-26 16:18
How can I fix this Problem Please Help ??
edwardone replied at 2019-2-16 02:50
Здравствуйте! В момент обновления ПО программа считал ...
Alan_C replied at 2019-2-26 16:18
How can I fix this Problem Please Help ??
amy replied at 2019-3-1 08:26
Sir, please give me the serial number of your scope, it is on the battery cover.
Alan_C replied at 2019-3-5 06:09
Hi Amy
here is the Serial No: CN1848008001214
Elected replied at 2019-3-11 06:03
Where can i get a full dump to flash via stlink? Где можно раздобыть полный ...
OASJ2YSeeEhBQo1 replied at 2019-3-11 07:15
There is a thread on EEVblog forum where we are discussing this meter and where you'll find a link ...
Elected replied at 2019-3-11 14:27
I had failed the DFU update, so device is bricked, any way to get the calibration params from it? ...
Sebastien replied at 2019-3-21 00:11
The firmware update procedure is not working for me.
Pushing F1 + Power. Waiting for the play/pause ...
amy replied at 2019-3-22 13:42
Please take a picture to study
amy replied at 2019-3-27 16:12
Sorry, I can't open the link. Please upload by this link: https://www.filemail.com/
amy replied at 2019-3-6 15:08
Sir, I think your oscilloscope doesn't have a signal source.
It was our fault. Label model and in ...
Sebastien replied at 2019-3-28 01:53
Here is the link :
https://fil.email/EabNNgxm
Alan_C replied at 2019-3-28 02:40
why is that a 30-year-old fluke multimeter is 5x faster than this hantek on DMM mode reading Resist ...
echarlus replied at 2019-3-29 17:11
Hello,
I've received a new 2D42 yesterday and it was working fine. I've tried to upgrade firmware by ...
nnnnik replied at 2019-3-30 07:36
Hi, amy
can you open source code?
12345 replied at 2019-3-29 23:35
https://fil.email/8s7tpIS2
amy replied at 2019-3-28 11:28
Method 1:
First turn off the scope and connect the scope to your computer.
Press F1 and power button ...
amy replied at 2019-4-2 11:30
You should use 3.3V.
echarlus replied at 2019-4-6 01:16
Hello,
I've tried to follow the procedure described in "Program Arm1" but the Flash Loader demonst ...
12345 replied at 2019-4-6 02:11
Connect RX to TX and connect TX to RX
echarlus replied at 2019-4-6 05:23
Thanks for the hint (I should have thought of that ...) unfortunately it did not solve my problem. ...
Sebastien replied at 2019-4-5 04:43
Both solutions are not working.
As soon as it get some power from USB or battery the scope is star ...
crsor replied at 2019-4-23 23:54
Meu hantek 2c42 mostra uma voltagem de pico no pico errada. Ja calibrei as pontas e nada resove. Ten ...
OASJ2YSeeEhBQo1 replied at 2019-4-24 22:10
Via ser difícil conseguir uma resposta aqui falando em português, n?o adianta nd ficar repetindo ...
crsor replied at 2019-4-24 22:33
Good morning everyone. I'm Brazilian and I need help from geniuses. I have the 2C42 with the lates ...
crsor replied at 2019-4-27 05:12
Hello grateful for your response. I understood what you wrote. I expressed myself wrong. What someth ...
OASJ2YSeeEhBQo1 replied at 2019-8-4 10:47
Just tried the last Firmware (2019060601), what were the changes on it? It would be nice to have a c ...
g00d replied at 2019-8-14 21:43
Здравствуйте. Почему после обновления FPGA меню новое до ...
amy replied at 2019-8-15 08:57
Sir, I didn't reproduce your problem.
Please give me a video to study.
amy replied at 2019-8-15 08:59
Sir, do you mean the model in the system information is different from that in the front panel?
Up ...
g00d replied at 2019-8-16 22:20
Вот фото.
amy replied at 2019-8-15 08:57
Sir, I didn't reproduce your problem.
Please give me a video to study.
g00d replied at 2019-8-16 22:20
Вот фото.
OASJ2YSeeEhBQo1 replied at 2019-8-17 13:20
Hi Amy, Dmitrkov already posted a video, so he can reproduce the problem as well.
I've noticed th ...
updated 2019082401, but sysinfo reports 2019060601.
I went back to the version 2019031201
amy replied at 2019-3-12 14:07
If you can use TTL serial port tool, please refer to the attachment to program arm1 and arm2:
http ...
gongye5776601 replied at 2019-8-26 09:28
Hello, I don't know if I can understand the Chinese I sent. I would like to ask you, my 2d72 hand-h ...
amy replied at 2019-8-28 16:47
Please refer this:
https://www.dropbox.com/s/xop4snveegnrj2d/Hantek2000%20Program%20Arm1.zip?dl ...
Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/) | Powered by Discuz! X3.2 |