Title: DSO4102C trigger jitter [Print this page] Author: zendx Time: 2023-4-22 04:10 Title: DSO4102C trigger jitter Edited by zendx at 2023-4-22 04:28
Hi.
I have problems with the Hantek DSO4102C oscilloscope.
The signal on the X axis has a noticeable jitter at sec/div values less than 200 ns/div.
Here's how it looks like:
[attach]5477[/attach]
[attach]5479[/attach]
Is it possible to somehow fix that? I have performed self-calibration of the oscilloscope several times, but it doesn't help.
Latest Firmware installed.
Author: zendx Time: 2023-4-22 04:17 Edited by zendx at 2023-4-22 04:18
Can someone check on their oscilloscope (DSO4000, DSO5000) how the same signal (for example, from a 1 kHz test generator) is displayed at values of sec/div less than 200 ns/div? With averaging off.
Author: kevinmartin Time: 2024-2-12 14:50
The DSO4102C trigger refers to the DSO4102C DSO4102C Difference or contradiction in the trigger signal time in the Achiloscope. The trigger jitter can have a negative impact on the accuracy and reliability of the measurement, especially when seizing sharp and precise gestures.