Title: DSO5202BMV - Enhancement Request [Print this page] Author: rwhalb Time: 2016-8-27 21:27 Title: DSO5202BMV - Enhancement Request Edited by rwhalb at 2016-8-27 21:27
Support:
I have a Hantek DSO5202BMV Oscilloscope, V3.30.0 (160815.0).
Enhancement request:
Would it be possible to add an audio option (beep) when a trigger event occurs in Mode: "Normal".
This would be useful in low frequency trigger situations. Also allows one to multi-task and do
other activities while listening for a trigger event.
---Thank you for your consideration.
rwhalb
Author: Oleg10011001 Time: 2016-8-28 00:59 Edited by Oleg10011001 at 2016-8-28 01:18
I agree, it would be very convenient. I also want to have the DSO5202BM. Also, the sound notification is required when the trigger occurs when the "SINGLE SEQ" button has been pressed. In addition, I think that it should be possible to enable and disable these sounds. This setting can be placed next to the one that allows you to enable or disable the sound when pressing buttons.
Author: amy Time: 2016-9-6 17:43
Please download the latest firmware on this link: http://hantek.com/en/ProductDetail_3_12.html Author: rwhalb Time: 2016-9-7 19:45
Amy / edison:
I have installed the latest firmware for my DSO5202BMV Oscilloscope: 3.30.0(160905.0).
I do not know where in the menu you put the audio option (beep) when a trigger event occurs???
Thank you for your support.
rwhalb Author: amy Time: 2016-9-12 10:12
Please press "Utility->Option...(Page3/3)->Trigger Beep(Page2/2)" to open the option.
The premise is the keypad beep opened.
Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/)