|
Hi Amy, Dmitrkov already posted a video, so he can reproduce the problem as well.
I've noticed the issue with the charging status icon in FW 2019050901 and 2019060601. To reproduce it, just connect the device to a USB port in a computer or the wall charger while in scope mode. In DMM or AWG mode de icon status works normally. When the cable in disconnected, the battery icon flashes in red, even with the battery full.
Another bug that is older (I've reported it some time ago, but probably went unnoticed) and I think is more critical is in AWG mode. With the "Gen out" disabled if you use the virtual keypad to enter any parameter of the waveform, when you exit from the keypad the output of the function generator is activated, but the status icon on the display and the led in the play button still indicates it as off.
To try this, set the device to AWG mode, connect "Gen out" to an oscilloscope so you can see the output. Make sure the output of the AWG is off, now press, ie, F2->F2 to open the virtual keypad (works in any parameter), enter a value or just hit enter to exit the keypad. You will see in the oscilloscope that the output is now activated.
If I have some time later, I can try to make a video to ilustrate, but I am pretty sure it is very straight forward to reproduce these problems.
|
|