|
Edited by amy at 2019-11-25 09:53
Update the firmware of Hantek2D72/2D42/2C72/2C42
Update with DFU software.
1. Download the programming tool in the following link and install. http://hantek.com/en/ProductDetail_1_13174.html
2. Press F1 and Power on button of the oscilloscope at the same time to enter programming mode.
3. Connect the oscilloscope to the computer and open the device manager of the computer.
4. Find a new device and right click it to update the driver. The driver files are in this path: STMicroelectronics\Software\DfuSe v3.0.5\Bin\Driver.
5. Open DfuSe Demo software, click "Choose" to select the firmware (***.dfu), and click "Upgrade" to update the firmware. After updated, click "Leave DFU mode" to exit the programming mode.
Also, users can use the software to update the firmware.
1. Download the software in the following link and install. http://hantek.com/en/ProductDetail_1_13174.html
2. Connect the scope to your computer via the USB cable.
3. Run the software Hantek2xx2.
Confirm the scope is connected to the computer successfully.
If not, please open the device manager to install the driver maunally.
4. Click "Help->CheckUpdate" to open HT2xxAutoUpdate software, now update according to Wizard.
|
This post contains more resources
You have to Login for download or view attachment(s). No Account? Register
x
|